News Center





Do you know the shape of Special Bolt?

Special Bolt is a mechanical part, a cylindrical threaded fastener with a nut. So do you know what its shape is? Let’s take a look at it with the editor below!

Generally, the countersunk head is used where the surface after connection is required to be smooth without protrusions, because the countersunk head can be screwed into the part. The round head can also be screwed into the part. The tightening force of the square head can be larger, but the size is large. In addition, in order to meet the need of locking after installation, there are holes on the head and holes on the rod. These holes can prevent the Special Bolt from loosening when it is vibrated. Some Special Bolt has no threaded polished rod to be thin, called Special Bolt with thin waist. This Special Bolt facilitates the connection of variable forces. There is a special high-strength Special Bolt on the steel structure, the head will be larger and the size will also change. In addition, there are special uses: T-slot Special Bolt is used, a lot of machine tool fixtures are used, the shape is special, and both sides of the head should be cut off. Special Bolt, used to connect the machine and the ground, has many shapes. U-shaped Special Bolt, as mentioned above. and many more. There are also special studs for welding. One end has a thread and the other is not. It can be welded to the part, and the nut is directly screwed on the other side.
In summary, the editor tells: A brief introduction to the shape-related knowledge of Special Bolt, you can learn more.