A bolt is a type of fastener consisting of a head and a screw (a cylinder with an external thread). It needs to be used in conjunction with a nut to fasten and connect two parts with through holes. This form of connection is called a bolted connection. If the nut is unscrewed from the bolt, the two parts can be separated, so the bolt connection is a detachable connection. Anchor bolt is a form of bolt connection. After assembly, only the nut part can be disassembled. The screw part and the concrete base material are fixed together in some form and cannot be separated. So do you know what the sliding tooth solution for bolts is? Let's follow the editor of HDG Carriage Bolt supplier china for a brief understanding!

1. Discuss with the manufacturer and use high-quality hexagon socket head bolts to produce wire rods. On the other hand, manufacturers must remember to take the produced natural hexagon socket head bolts for hardening treatment, and require the hardening factory to reach the indicated hardness index.
2. The customer is required to use the corresponding tools reasonably when using it. For the sake of convenience, use unreasonable tools to hit the hexagon socket bolts. Also, tell the customer that you don't need to use too much force when hitting the hexagon socket bolts. Just get the balance right.
The above is the introduction of HDG Carriage Bolt supplier china: a brief introduction to the solution to the sliding teeth of bolts.